Products
GENKI - Low-noise picosecond laser modules
The GENKI low-noise picosecond laser family is designed for maintenance free 24/7 operation over the entire temperature range and product lifetime.
The GENKI guarantees sustained performance between 10 °C - 40 °C ambient temperature without intermittent pulse drop-outs, interruption of mode-locking or start-up difficulties at different ambient temperatures.
The GENKI generates pedestal-free, close to transform limited pulses with unmatched temporal and spectral purity and stability, free of ASE background noise.
Picosecond
GENKI Model |
-10 |
-15 |
-10 HPNd |
-10 HPYb |
|---|---|---|---|---|
Center wavelength |
1064 nm |
1550 nm |
1064 nm |
1030 nm |
Puldse duration sech2 |
< 10 ps |
< 5 ps |
< 10 ps |
< 5 ps |
Average output power |
> 10 mW |
> 100 mW |
> 1 W |
> 1 W |
Pulse repetition rate |
40, 50, 75, 80, 100 MHz |
40, 50, 75, 80, 100 MHz |
||
Spectral Bandwidth |
< 0.3 nm |
< 5 nm |
< 0.3 nm |
< 0.6 nm |
Output polarization |
linear |
linear |
||
Output beam |
Panda PM FC / free space |
free space |
||
Amplitude noise |
< 0.5 % rms (1h) |
< 0.5 % rms (1h) |
||
Warm-up time |
< 10 minutes |
< 15 minutes |
||
Operation temperature |
10 °C - 40 °C |
10 °C - 40 °C |
||
Storage temperature |
-15 °C - 65 °C |
-15 °C - 65 °C |
||
Size laserhead |
250 x 230 x 54 mm3 |
260 x 250 x 54 mm3 |
||
Power supply |
90 - 264 VAC, 47 - 63 Hz |
90 - 264 VAC, 47 - 63 Hz |
||
Features:
- Push-button operation, maximum useability: No PC required, no hidden reset or adjustment knobs or screws, guaranteed maintenance free 24/7 operation.
- It runs with a 5V/24V laptop-like power supply, laser and driver are passively air cooled, no chiller, no forced air cooling or long warm up times.
- Very high quality spectral and temporal pulse shape: No pedestal or satellite pulses, clean optical spectrum with highly constant and repeatable center wavelength, bandwidth and spectral shape.
- Record-low amplitude (RIN) and phase noise (timing jitter),
no ASE background noise (no optical amplifier built-in).
• RMS amplitude noise < 0.5 % over 1 h
• RMS timing jitter < 100 fs [100 Hz - 1 MHz] (free running)
• RMS timing jitter < 35 fs [10 Hz - 1 MHz] (requires synchronization option)
• Pulse repetition rate frequency drift < 50 Hz over 1h (free running)
Please inquire for other wavelengths, pulse repetition rates or pulse durations.
Options
- Synchronization to external clock
- Repetition rate tunability
- Simple electronic interface for pump power control
- Ask for SHG and THG
- See our Accessories Page
Applications
- Seed oscillator for amplifiers
- Material processing
- Supercontinuum generation
- Homeland security
- Sensing, Lidar
- Spectroscopy
- R&D
